Sleeve anchor hex bolt

How to install sleeve anchor

1. Drill the hole, the holes should be the specified diameter for the anchor that you plan to use and at least 1/2” to 1” deeper than the expected depth of the fixing.
2. Clean the hole, this is such an important step before installing the sleeve anchor. It ensures proper installation and guarantees the anchor will have maximum holding ability.
3. Insert the sleeve anchor, tap the anchor with a hammer until the nut and washer are flush with the fixing.
4. Tighten, use a wrench for hex turn until the installation torque is reached. Do not over-torque as it will affect the fastening value.